BYHMJ - METEC 4160C COMP. 2
- MSDS: BYHMJ
- Manufacturer: METALLURGICAL TECHNOLOGIES INC
- Product Name: METEC 4160C COMP. 2
- National Stock Number: 3439-01-388-5661
Product Identification
Product ID:METEC 4160C COMP. 2
MSDS Date:08/01/1991
FSC:3439
NIIN:01-388-5661
MSDS Number: BYHMJ
Responsible Party
PEARLAND, TX 77581
US
Emergency Phone: 713-485-7765
Info Phone: 713-485-7765
Cage: 63726
Contractor
Telephone: 713-485-7765
Cage: 63726
Ingredients
POLY-P-OXYBENZENE POLMER
CAS: 26099-71-8
Hazards
Routes of Entry: Inhalation:YES Skin:UNKNOWN Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHALATION-REMOVE PERSON FROM SOURCE, IF NOT BREATHING,
PERFORM CPR, IF BREATHING ADMINISTER OXYGEN. INGESTION-HAVE PERSON
DRINK WATER OR MILK AND INDUCE VOMITING. GET MEDICAL ATTENTION.
Fire Fighting
Flash Point:NA
Autoignition Temp:Autoignition Temp Text:NA
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:MATERIAL WILL NOT BURN.
Fire Fighting Procedures:SURROUNDING FIRE MAY CAUSE THIS MATERIAL TO
DECOMPOSE CAUSING IRRITATING FUMES. WEAR MSHA/NIOSH APPROVED
SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:NO
Accidental Release
Spill Release Procedures:THIS MATERIAL IS NON TOXIC AND CAN BE DISPOSED
OF AS IF IT WERE COMMON PLASTIC WASTE.
Neutralizing Agent:NA
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE.
Exposure Controls
Respiratory Protection:NIOSH APPROVED DUST RESPIRATORS.
Ventilation:LOCAL EXHAUST-YES.
Protective Gloves:YES.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:NA
Melt/Freeze Pt:M.P/F.P Text:ND
Decomp Temp:Decomp Text:NA
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:1.44
pH:NA
Viscosity:NA
Evaporation Rate & Reference:NA
Solubility in Water:INSOLUBLE
Appearance and Odor:STRAW COLORED POWDER ODORLESS.
Percent Volatiles by Volume:NA
Corrosion Rate:NA
Stability
Stability Indicator/Materials to Avoid:YES
OPEN FLAME/FIRE.
Stability Condition to Avoid:OPEN FLAME/FIRE.
Hazardous Decomposition Products:POISIONOUS GAS OR FUMES ON
DECOMPOSITION.
Conditions to Avoid Polymerization:FIRE MAY PRODUCE POISIONOUS OR
IRRITATING FUMES.
Disposal
Waste Disposal Methods:SWEEP UP AND TREAT AS COMMON PLASTIC WASTE.LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.